| |
Air
Cooled Heat Exchangers, Dow Therm Condensers and Coolers, Shell and Tube
Heat Exchanges, Inter Coolers & After Coolers, Tube in Tube process
Heat Exchanges, Oil Coolers, Bare Tube Heat Exchangers, Shell & Tube
Dx-Chillers, Finned Tube Process Heat Exchangers, Air Heaters, H.P. &
L.P. Feed Water Heaters, Pressure Vessels & Coded Pressure Vesslesface
Condensers, Columns, Steam coil Air Heaters, LPG-Bullets, Shell And Tube
Condensers |
|
| |
|
|
|
|
|
|
|
|
| |
|
With
most sufficient handling and fabrication facilities PAT has
aquired vide acceptance in industries for manufacturing of
Coded Vessels & Columns |
| |
Columns |
 |
| |
PAT has hand on experience
to manufacture Vessles & Columns from almost all material
of constructions, used in process Plant industries. |
| |
PAT has worked with Carbon
Steel, Stainless Steel, Monel, High Corrosion Resistant Steel
like (Duplex, SS317L, Copper Alloy). Cladded Steel etc. |
| |
Our Desigining and manufacturing
also has critical approvals like IBR (Chief Controller of
Steam, Smoke, & Nuisance), CCOE (for explosive fluide)
etc. |
| |
PAT has already manufactured
vessles for critical fluids like Helium, LPG, Ammonia, Nitrogen,
Hydrogen, High Pressure Air, Neuclear Waste, etc. |
| |
|
|
|
|
|
 |
 |
|
| FIND SOLUTION |
|
| |
|
By
Industries |
| |
|
|
|
| |
|
By
our Business Areas |
| |
|
|
|
| |
|
| |
|
|
| |
TYPE: |
Vertical Cylinderical
All Type Columns |
| |
Shell Diameter: |
300 MM to 5000 MM |
| |
Height: |
50 Meter |
| |
Thickness: |
5 MM to 40 MM |
| |
Design Code: |
*ASME Sec-VIII, Div-1,
*IS-2825, *BS-5500 |
| |
M.O.C.: |
Plate (Shell &
Dish)
*Carbon Steel *SA515 GR. 60/70
*SA 516 GR.60/70
*A537 Class I *IS 2002 GR.2
*Stainless Steel *SA-240
GR.304, 304L, 316, 316L, 318L, 321
*Duplex Steel UNS 31803
*Exotic Material
*Clad Material |
|
| |
|
| |
|
|
|
| |
|
|
Coded
Pressure Vessels |
| |
| |
TYPE: |
Horizontal
& Vertical Cylinderical Type Pressure Vessels, Storge
Tank of LPG Ammonia And Ethylene Oxide & Underground
Petroleum Tank, Road Tankers, Tank Wagons, Low Temperature
Process Equipments, Chlorine Tonner |
| |
Shell Diameter: |
300 MM to 6000
MM |
| |
Thickness: |
5 MM to 40
MM |
| |
Design Code: |
*IS-2825, BS-5500,
*ASME Section-VIII, Div. - 1, API 650, IS 803
*IBR, *SMPV Rules 1981 |
| |
Statutory
(Approval): |
IBR, *CCE,
*RDSO |
| |
M.O.C.: |
Plate (Shell
& Dish)
*Carbon Steel *SA515 GR. 60/70
*A537 Class I *IS 2002 GR2
*Stainless Steel *SA-240
GR.304, 304L, 316, 316L, 318L, 321
*Duplex Steel UNS 31803
*Exotic Material
*Clad Material |
|
|
|
|
| |
|
|
 |
|
Patels
Airtemp (India) Ltd. Manufacturer & Exporter of Shell
and Tube Heat Exchange | Air
Cooled Heat Exchanger | Columns
Refrigeration
& Air Conditioning Equipments | Window
Air Conditioners | Split
Air Conditioners | Ductable
Split Air Conditioners
Air
Cooled Packaged Air Conditioner |
|
|
